|
Model |
|
|
||||
|
Range |
200 V SINGLE-PHASE, 0.1 to 3.7kw 200 V THREE-PHASE, 0.1 to 18.5kw 400 V THREE-PHASE, 0.2 to 18.5kw |
200 V THREE-PHASE, 0.4 to 110kw 400 V THREE-PHASE, 0.4 to 630kw |
400 V THREE-PHASE, 3.7 to 630kw |
200 V single-
PHASE,.1 to 3.7 kw
200 V THREE-
PHASE,.1 to 22 kw
400 V THREE-PHASE,.2 to 30kw |
200 to 240 VAC, 0.55 to 110 kW |
200 V THREE-PHASE, 7.5 to 75 kw 400 V THREE-PHASE, 5.5 to 260kw |
|
Control |
V/f Control |
V/f Control |
V/f Control Open Loop Vector (OLV) for PM |
V/f Control (V/f) Open Loop Vector Control (OLV) Open Loop Vector Control for PM (OLV/PM) Advanced Open Loop Vector Control for PM (AOLV/PM) EZ Open Loop Vector Control (EZOLV) |
V/f and Vector Control with/without encoder EZ Vector |
V/f Control V/f Control with PG Open Loop Vector (OLV) Close Loop Vector Open Loop Vector (OLV) for PM Close Loop Vector for PM |
|
Max. Output Frequency |
400 Hz |
400 Hz |
200 Hz |
590 Hz |
590 Hz |
400 Hz |
|
Applicable Motor |
Induction Motor (IM) |
Induction Motor (IM)
|
Induction Motor (IM)
|
Interior Permanent Magnet Surface Permanent Magnet Induction |
Induction Motor (IM) Permanent Magnet Motor (IPM/SPM) Synchronous Reluctance Motor (SynRM) |
Induction Motor (IM) Permanent Magnet Motor (IPM/SPM) |
|
Fieldbus Interfaces |
RS-232C |
RS-232C |
RS-232C |
Ethernet/IP ModBus TCP/IP DeviceNet Profibus DP Profinet Expandable I/O EtherCAT CANopen CC-Link MECHATROLINK-III MECHATROLINK-II |
RS-232C |
RS-232C |
|
Functions |
Energy Saving Function Double Rating (ND/HD) Speed Search Slip Compensation Torque Compensation PID Control (with sleep function) DriveWorksEZ (PLC SW ) Momentary Power Loss Ride-Thru Application Parameter Presets Preventive Maintenance Functions RS-232C Interface |
Speed/Torque Control Switching |
Momentary Power Loss Ride-Thru Speed Search Overtorque/undertorque Detection 8 step speed (max) Accel/decel Switch Energy saving control PI control (with sleep or snooze function) High slip braking Removable terminal block with parameter backup function Mot |
- Easy Tuning of Motors with Minimal Information - Monitors machine conditions in real time while the drive is in operation - Easy Tuning of Motors with Minimal Information - Signicant Reduction in Wiring - Closed-Door Operations and Monitoring -Support from Machinery and Equipment Startup to Maintenance - Use a Smartphone to Adjust the Drive and Perform Maintenance - Efcient Production Management via the Cloud - Simple Replacement of V1000 Drive |
Integrated PID controller with sleep function
Automatic restart after failure |
Torque Control, Droop Control, Speed/torque Control Switching, Feed Forward Control, Zero Servo Function, Momentary Power Loss Ride-Thru, Speed Search, Synchronous Transfer with Commercial Power Supply, Overtorque/Undertorque Detection, Torque Limit, 17 Step Speed (max), Accel/decel Switch, S-curve Accel/decel, 3-wire Sequence, Auto-tuning (rotational, stationary tuning), Dwell, Cooling Fan on/off Switch, Slip Compensation, Torque Compensation, PID Control (with sleep function), Energy Saving Control, DriveWorksEZ (customized function), Removable Terminal Block with Parameter Backup Function, Online Tuning, Overexcitation Deceleration, Inertia |
